Wet Tile Adhesive (WTA) Sub-Floor Moisture & Injection Repair Epoxy Adhesive

The Fix for Wet, Hollow & Loose Tiles!

Trapped moisture under your tiles usually means an expensive, messy tear-out. Not anymore. WTA is specially engineered to penetrate damp sub-floors, displacing trapped water to permanently re-bond loose, crunchy, and hollow tiles right where they sit. WTA is supplied in a kit with premeasured sachets to effect two repairs.

The Ultimate Wet-Subfloor Solution

• Displaces Water: WTA is specially formulated to bond even when moisture is present.
• WTA is injected to flood the under-tile area, then expands to 5 times its volume (at no pressure to the tile) to fill the cavity and adhere to both surfaces.
• Zero Tile Removal: Saves your existing tiles, waterproofing, and layout.
• Massive Cost Savings: Eliminates the need for costly demolition and retiling.
• Stop the Crunch: Instantly stabilises hollow zones caused by water damage.
• Safe & Certified: Low VOCs, non-hazardous, non-flammable, and 100% Made in Australia by Platinum Epoxies.

How to Repair Your Water-Damaged Tiles

1. Drill: Use a masonry bit to drill an injector hole through the grout lines. Do not pierce the sub-floor.
2. Clear: Vacuum over the hole. Tap the tile gently with a rubber hammer to loosen debris and trapped moisture pockets.
3. Insert the applicator tip to check depth.
4. Mix and Inject: Cut the joined sachets and squeeze into the mixing container. Mix well for a minute and then suck the WTA into the Syringe provided. Position the syringe in the drilled hole and squeeze the WTA through the syringe, pushing through the hole in the grout line to ensure complete coverage. There will be enough product for 2 syringe amounts.
5. Set: Wipe away excess product with a wet sponge. Place weights on top of the tile to prevent movement. Allow 12–24 hours to dry clear.
6. Grout: Re-grout directly over any holes made. Wipe clean. Your moisture-damaged floor is officially saved and rock-solid!

Save Your Tiles from Water Damage – Shop Now!

Kit contains:

1 x Resin Sachet kits (Part A + Part B) 20ml - (expands up to 5 times its size after mixing)

1 x Mixing Tray

2 x Mixing Sticks

1 x Syringe

Instructions

Mailing Box