For Walls, Tiles and Floors - 'Tuff Cote' resurfacing is a cost-effective and eco-friendly method to restore a worn or chipped vanity or bathtub, a shower, a benchtop or floor in residential, commercial buildings, as well as makeovers for motels, hotels, boats, RV's, etc. It is easy to apply and provides a beautiful, durable, scratch, chip and scuff-resistant finish that you can achieve yourself. All restored to a new, modern look without the hassle of replacement or major renovations. The process is simple and involves preparing the old surface by cleaning and etching. Followed by applying the WTF Tuff Cote resurfacer to produce a highly chemical-resistant coating of the surface. WTF Tuff Cote can be rolled using a 100mm wide, 4mm nap microfibre roller or brushed on the surface using a 38mm - 50mm quality brush for a durable finish. Using this product can produce good results for the DIY market and offers a faster turnaround than replacement (usually in a few hours).

Please note: This product is not made from your everyday Epoxy or even some of those cheaper paint type systems. WTF Tuff Cote uses the highest quality epoxy system available, known for its excellent chemical and high temperature resistance, and is also used in a variety of applications. Our Epoxy resin is used in other key applications, including chemical-resistant coatings and linings, adhesives, coil coatings, and marine & protective coatings. It is also used in chemical-resistant floor topcoats, castings, and composites. Specifically, it demonstrates strong resistance to acids (including sulfuric and hydrochloric), alkalis, bleaches, and solvents. Specific chemical resistances: Acids: Strong resistance to various acids, including high concentrations of sulfuric acid (up to 98%) at elevated temperatures (50 deg C /120 deg F) and hydrochloric acid.

Benefits of Resurfacing:

• Cost-Effective: It's much cheaper than replacing the entire bathtub, vanity, or tiles in buildings, or trying to remove and replace bathrooms and kitchens in boats or RVs.

Fast & Convenient:

• The process is rapid, usually finished within a few hours.

Environmentally Friendly:

• Resurfacing minimizes waste by preventing the demolition and disposal of old fixtures.

Variety of Options:

• You can choose from a range of colours and finishes to match your style.

Improved Appearance & Durability:

• It restores the shine and lustre, making every surface look new and increasing its durability against wear and tear.

Non-Invasive:

• It avoids the major disruption of building renovations or the makeover of your boat or RV..

WTF Tuff Cote is a two-part material that, when mixed, applied, and dried, will give a shiny surface that will resist harsh cleaning chemicals used today. WTF Tuff Coat can even be used to resist a permanent underwater marine environment for the maximum protection of fibreglass hulls.

WTF Tuff Cote is mainly available in colours, but a clear form is also available for level surface recoating.

Coverage varies: Normal coverage is about 0.6 kg per sq. mtr for coloured materials, with usually only one coat required. For clear coatings, allow about 0.25 liters per sq mtr per coat, assuming one coat applied correctly is all that is needed.

Minimum temperature for application: 10 deg C.

Available in various size kits: 1 Kg, 4 Kg, 20 Kg.

Mix by weight: 5 parts A to 1 part B

1.2 kg kit contains 1 kg Pigmented Part A Base Resin (just over 1/2 ltr) plus 200 grams hardener Part B. 4.8 kg kit contains 4 kg Pigmented Part A Base Resin (just over 2 ltr) plus 800 grams of hardener Part B. 24 kg kit contains 18 kg Pigmented Part A Base Resin (about 12 ltr) plus 4 Kg hardener Part B and 2kg of pigment.

Types Available: White, Natural (ready for Pigments of your choice to be added), and Clear.

This product contains no solvents and is not classed as a Dangerous Goods for transport. As such, it can be sent via mail or air freight without additional levies and can easily be transported internationally.