Australian-made, Platinum Ultra Clear PRO Fast Setting epoxy is an alternative to the other 55 varieties of Platinum resins. Platinum UltraClear sets twice as fast as Deep Cast resins, and is suitable for making small pieces, cheeseboards, small arts, coatings, etc. To see more of the range of Platinum Epoxies - click the link here - view resins like our Rapid cure epoxies, food grade (if you require) or High-temperature epoxies (up to 1830 deg C), and these are only a few of our 56 different resins:

Please note: Pictures of jugs are for label notes only (photographing round bottles, misses half the info!)

With Platinum UltraClear PRO, You can shorten the curing time even further by applying mild heat. Suitable for making small pieces (pendants; coasters; or anything weighing from a few grams to a few hundred grams) and flat surface coatings.

Fast setting within 24-36 hours.

Do not pour over 25mm - 30mm to avoid overheating.

Avoid mixing large amounts each time.

Mixing Ratio 2:1 by weight.

Note: Always close the caps after each usage, otherwise the contents might turn cloudy and skin might form if the bottle cap left open. Larger quantities are available upon request, please contact us.

100% Australian OWNED and Australian MANUFACTURED - Best Quality, Best Value and Reliable Epoxy Resin

Platinum MANUFACTURED - Best Quality, Best Value and Reliable Epoxy Resin

These are high-quality products & MADE IN AUSTRALIA - NOT overseas products getting relabelled and filled in the USA, and please don't risk your work on the cheap stuff - can't tell you how many customers have told me they purchased the cheaper resin and it ruined their work - there are important standards for art resin.

Our Epoxy Resin has decisive advantages and benefits to the user over those offered by other brands. Premium products use premium ingredients from the best suppliers.

Why you should choose Platinum UltraClear PRO Epoxy Resin:

★ No VOC; Zero Solvent; BPA Free; Eco Friendly; Meet and Exceed Australian Standard AS 2311-2017 and ASTM D3960-05

★ Crystal Clear Finish: Cures Crystal Clear. One of the clearest epoxies you can find. Suitable for wooden bar tops, embedding pictures, bottle cap table projects & more

★ UV Resistant Formula: Added UV Inhibitors resist yellowing when exposed to the sun and Ultra Violet light

★ Self-Level Mixture: Will self-level over surfaces including corners, bar rails, and edges leaving a consistent thickness

★ Superior Air Release: Some epoxies may bubble, fish eye or crater. Our UltraClear PRO formula features superior air release, minimizing these concerns

★ Impact Resistant: Cures super strong, leaving a smooth impact-resistant surface

★ Minimal odour and NOT AT ALL yellowing after a long period of time.

★ Easy To Use: 2 to 1 by WEIGHT mix ratio

Our Epoxy will leave your projects with a durable, UV-resistant, impact-resistant high gloss finish. Don't ruin a one-of-a-kind project with an inferior epoxy.

Coverage depends on temperature (Epoxy resins before mixing act a little like honey - in Summer, they are very runny while in Winter they are less runny)and so the coverage can vary up from 250 grams per square meter per coat.

Platinum UltraClear PRO is a 2-part product (2 parts A and 1 part B by weight). This fast-curing Epoxy resin, when mixed with hardener, is poured into a mould and sets to a strong, hard-finished product.

Platinum UltraClear PRO is resistant to most household chemicals and can withstand surface temperatures around 80-85oC (resisting marks from hot drinks etc).

The special fast-curing character allows this product to demould within 24 hours.

The fast curing of Platinum UltraClear PRO is not suitable for very deep casting. We have about 56 other resin types to suit every need. This product is for someone who is in a hurry. For even shorter cure times, use Platinum 360+, Platinum UltraClear FG or Platinum SuperCoat Rapid (these are all food grade). This product can be used for outdoor use.

Directions for use: Mix resin and hardener EXACTLY in 2:1 ratio (Note: by weight not by volume) Use a plastic container for mixing. DO NOT use metal, especially aluminium containers to mix. Mixtures will turn a milky colour in aluminium containers. The plastic container must be extremely clean, and free of dirt; water; oil; and other contamination. Tiny contaminations deteriorate the quality of the final result. Once the product is poured into the mould, do not stir it or touch the surface to avoid defects. Most foam will float to the surface and burst itself. The curing will take 12 to 36 hours.

The following factors affect the curing time:

1. Mixing quantity (the more you mix, the faster it cures and vice versa).

2. Room Temperature (higher room temperature will speed up the curing)

Mixing ratio: 2:1 (2 Parts A and 1 Part B by weight).

Application temperature: Wide temperature range through summer to winter.

Pot life(working time): 1-2 hours (Data based on 100ml mixing; 20 degree C room temperature).

Please pour this product into mould as soon as possible, to avoid bubbling.

Time to reach non-tacky: 5-18 hrs Depending on the room temperature (Data based on 100ml mixing).

Time to reach full cure: 24 hrs (Data based on 100ml mixing).

Density @ 25 deg C: Part A 1.10 and Part B 0.927

Clarity: Pt-Co value < 10 for both Part A and Part B

Compatibility: Binding to metal, inorganic materials including cement; glass, stone, natural materials including wood; particle board, most plastics except polyethylene, polypropylene, EPDM.

Shelf life: 12 months

Please Note: This product is a very pure epoxy and it acts similarly to pure honey (during Winter honey is extremely thick, and yet in Summer, that same honey is very thin and runny). So too it is with epoxies. Just lke pure honey which sometimes turns to sugar, pure Epoxy resin can act in a similar way and develop crystals (usually in Part A). This is not from faulty resin but the common thought is that it is from the cyclic hot days and cold nights when stored. An easy fix is to heat the jugs in boiling hot water for about 30 mins and this will restore the resin to be perfectly clear. The heating is also good to help remove air bubbles trapped in the epoxy due to transportation.

If I have to do a critical pour or application, as a tip, I heat the jugs in boiling water the day before the pour and let them cool down for the day of my pour. Additionally, when mixing the two parts, I decant them into the mixing container by pouring down the side of the container. Extra effort is needed to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not take it off the bottom of the mixing container. Mixing is so important to get the best results and can take it can take from 3 to 5 minutes.

Manufactured in Australia by Platinum Epoxies

For material safety sheet, msg us refer SDS, do not swallow, keep away from children. CAUTION: All epoxies (except of FDA Food Grade, share the same chemical natural. Treat this like other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN. For those with allergies? Use Platinum p360+ or Platinum UltraClear Food Grade.

Disclaimer: You must be a least 21 years old to order and possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer.

• Absolute water clarity
• Say good bye to bubbles!
• Awesome rock hard gloss
• Such competitive pricing!
• Easy 2:1 by weight ratio - Zero VOC's
• Cast up to 25mm - 30mm thick
• The low viscosity makes this a very economical Epoxy - covers so well!
• Made in Australia - employing locals during the Covid pandemic.
• May be supplied in different containers due to the availability

Suspected faulty product: Stringent production processes including testing at production and further testing at packaging are designed to prevent any possible faulty products from being sent to customers. 99.9% of customer-reported faults can be traced back to user error. We request that the customer complete a resin test before reporting a possible fault. For testing of resin, use the following link: Resin testing Additionally, when products are sold to thousands of users worldwide without problems coming from the same source, the individual problems are mostly traced back to user error.

The new help pages are progressively populated. Please click on the link that follows: HELP PAGES . To view SDS, click link