521 PRO Epoxy Resin And Hardeners

Platinum 521 PRO epoxy resin system is our updated 5:1 marine epoxy resin that adheres to fibreglass, metals, timber and other materials to make a high strength, non Dangerous Goods, low viscosity, multi-purpose epoxy resin system. Ideal for laminating, glueing, sheathing, coating and all boatbuilding & industrial uses. Chose a hardener that will suit the best working conditions. Our original chemist Walter Bolt, developed a great system about 30 years ago, and now it has been suitably updated to fit our UniBase system. This product is not intended as a clear coating and we have plenty of other resins for that.

Please Note: As this product is very pure epoxy. And it acts in a similar manner just like pure honey (epoxies act similar to honey in that, during winter honey is extremely thick and yet in summer, that same honey is very thin and runny). So it is with epoxies. And just like pure honey which sometimes turns to sugar? Pure Epoxy resin can act in a similar way and develop crystals (usually in Part A). this is not from faulty resin but common thought is that it is from the cylic hot days and cold nights when stored. An easy fix is to heat the jugs up in 65 deg C scalding hot water for about 30 mins and this will restore the resin to perfectly clear. The heating is also good to help remove air bubbles trapped in the epoxy due to transportation.

If I have to do a critical pour or application, as a tip, I heat the jugs up the day before the pour and let them cool down for the day of my pour. Additionally when mixing the two parts, I decant into the mixing container by pouring down the side of the container. All this effort is to try to limit any possible air bubbles that could ruin the finished product. Even when mixing, I use a wide rule and do not even take it off the bottom of the mixing container. Mixing is so important to get the best results and can take 3 to 5 mins.

Manufactured in Australia by Platinum Epoxies

For material safety sheet, msg us refer SDS., Do not swallow, keep away from children. CAUTION: All epoxies (except of FDA Food Grade, share the same chemical natural. Treat this like any other epoxy. DO NOT SWALLOW. DO NOT CONTACT. Use all necessary PPE. KEEP AWAY FROM CHILDREN. For those with allergies? Use Platinum 360+ or UltraClear Food Grade.

Disclaimer: You must possess the knowledge regarding toxicity, health hazards, and all regulations required to store, use and dispose of this compound. No warranties are expressed or implied for any reason by the seller. The purchaser agrees to hold harmless the seller in any event, whether accident or injury, regarding the use or misuse of this compound. By purchasing and paying for this item, you are agreeing to this disclaimer.

May be supplied in different containers due to stock availability

Stringent production processes including testing at production and further testing at packaging are designed to prevent any possible faulty products from being sent to customers. 99.9% of customer-reported faults can be traced back to user error. We request that the customer complete a resin test before reporting a possible fault. For testing of resin, use the following link: Resin testing Additionally, when products are sold to 1000's of users worldwide without problems coming from the same source individual problems are mostly traced back to user error.

The new help pages are progressively populated. Please click on the link that follows: Technical and Help . To view SDS, click link