Note: This item is available for pick up from our Factory at Hemmant, or can be delivered using a Dangerous Goods (DG) freight coupon (link)

Remember that when buying many items at the one time from our store, you can click on the freight discount box at the time of your checkout, and receive a freight discount (this does not apply to DG Dangerous Goods freight)

PVA Liquid Mould Release is an ethanol/water based solution of Polyvinyl Alcohol (PVA). It has been specially formulated to act as a parting layer to separate between the mould surface (previously waxed) and unsaturated polyester or epoxy based composites. PVA Liquid Mould Release is normally supplied as blue (but can be purchased as clear). It is applied by brush, sponge or spray application. PVA Liquid Mould Release is water-soluble and so it is not advised to use with any resin system containing or generating water when curing. The Specific Gravity - 1kg = 1.099L

Epoxy Resin, Chopped Strand Mat, Tools and safety equipment are available in our store.

Clean all brushes, rollers and fibreglass tools with Acetone.

Always wear gloves and dust masks and avoid breathing vapours of resin or dust residue. ******see our “Safety and Protective” items in our “Fibreglassing Tool” section. https://aacompositesonline.company.site/Safety-&-P... ***** use in a well-ventilated area ******