Mineral Turpentine is a solvent commonly used for thinning oil-based paints and cleaning paint brushes and equipment after painting.

Typical Uses

• Thinning oil-based paints
• Diluting Linseed Oil (Raw and Pale Boiled)
• Removing wax, polish, and surface contaminants
• Cleaning paint brushes and painting equipment

Features

• Hydrocarbon-based solvent
• Affordable and effective

SDS Mineral Turpentine TDS Mineral Turpentine

How to Use Mineral Turpentine

1. Prepare your workspace
   Always work in a well-ventilated area. Ideal for DIY projects and surface prep, such as cleaning a cricket bat before oiling or painting.
2. Thin oil-based paints
   Add Mineral Turpentine gradually, following the paint manufacturer’s instructions, to achieve a smooth, even consistency.
3. Clean and prep surfaces
   Use to remove wax, polish, or contaminants from timber and other surfaces before applying linseed oil or paint.
4. Mix with linseed oil
   For easier application, blend Linseed Oil (Raw or Pale Boiled) with Mineral Turpentine in a 50:50 ratio after cleaning the surface.
5. Clean paint brushes
   Soak brushes in Mineral Turpentine to loosen paint, then wash thoroughly in warm soapy water.

Frequently Asked Questions (FAQs)

Q: What is Mineral Turpentine used for?
A: It’s ideal for thinning oil-based paints, cleaning brushes, removing wax/polish, and preparing surfaces for oil or paint finishes.

Q: Can I use it on a cricket bat?
A: Yes, it’s commonly used to clean and prepare bats before applying linseed oil.

Q: Is it suitable for general DIY projects?
A: Absolutely. It’s a versatile product and useful around the home and workshop.

Q: How do I use it safely?
A: Always wear protective clothing, gloves, and eye/face protection. Use in a well-ventilated area, avoid inhaling fumes, and keep away from flames or sparks. For full details, refer to the Safety Data Sheet (SDS).

Q: Can it be mixed with linseed oil?
A: Yes. A 50:50 mix with raw or pale boiled linseed oil improves ease of application after surface preparation.