Shore A Hardness- Approx. 10. Hardening Time (surface) : 20-45-mins pot life and 4-6hrs cure time, completely cured in 24hrs. Elongation Approx. 550-600%. Colour: Milky Clear. Tensile strength - approximately 4.0 MPa. Tear strength > 24 kN/m. Linear shrinkage less than 3% slow speed catalyst.

Properties: * Good fluidity means that it can fill the mould easily. * Easy de-moulding. * Mould-making speed is fast. * Great chemical stability and is both non-toxic and non-corrosive.

Directions:

Mix Silicone (Part A - a flowing liquid) and hardener (Part B - a thin liquid) in a ratio 100 grams of siliconel and 2-3 grams of hardener. Important: The Silicone and the hardener must be stirred in evenly. If not? then one part of the mold will have been cured and another part will not be cured. The silicone will dry and cure unevenly, which will affect the service life of the silicone mold or at worst? The mould has to be discarded.

Using a vacuum when air bubble treatment: If wanting to use the vacuum machine? Then use for a maximum of 10 mins, otherwise the Silicone could set and be discarded.

Applying the Silicone: Once mixed, pour the Silicone on top of the product. The product to be copied, may be coated with a release agent.

Safety - Always use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and nitrile gloves to minimize contamination risk.

KEEP OUT OF THE REACH OF CHILDREN.