APPLICATION

Read safety directions before use.

Step 1: Apply Antifoul Remover

• Using an Airless Sprayer: Use an airless sprayer with chemical-resistant fittings. Do not atomize the product. Spray directly onto the clean hull, ensuring that the antifoul coating is thoroughly covered.
• Brush Application: If you don’t have an airless sprayer, you can also use a brush to apply the product evenly across the surface.

Step 2: Cover with Plastic Wrap

Once the remover has been applied, cover the treated areas with plastic film. This helps to keep the product in contact with the antifoul coating, allowing it to break down effectively. Leave the film in place for 12 to 24 hours, checking periodically for signs of the antifoul coating breaking down.

Step 3: Remove Antifoul

After the treatment time has passed, you’re ready to remove the antifoul coating. There are two options for this:

• Pressure Washing: Using a pressure washer at a slight angle will help lift the antifoul off the boat hull. Our Antifoul Remover will have softened the antifoul, making it easier to wash away.
• Scraping: For any remaining areas, scraping can be effective in removing the coating.

Step 4: Repeat if Necessary